Salta gli elementi di navigazione
banner
logo ridotto
logo-salomone
DIEF Dipartimento di Ingegneria Industriale

Publications

2015:

  • Niccolo' Grossi; Antonio Scippa; Lorenzo Sallese; Ryuta Sato; Gianni Campatelli (2015). Spindle speed ramp-up test: A novel experimental approach for chatter stability detection. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, vol. 89, pp. 221-230, ISSN:0890-6955. Online access.
  • Grossi, Niccolò; Montevecchi, Filippo; Scippa, Antonio; Campatelli, Gianni (2015). 3D finite element modeling of holder-tool assembly for stability prediction in milling. In: 15th CIRP Conference on Modelling of Machining Operations, CMMO 2015, Kongresszentrum Karlsruhe, Karlsruher Messe- und Kongress-GmbH, Festplatz 9, deu, 2015, Elsevier, vol. 31, pp. 527-532. Online access.
  • Rafanelli, Francesco; Campatelli, Gianni; Scippa, Antonio (2015). Effects of cutting conditions on forces and force coefficients in plunge milling operations. ADVANCES IN MECHANICAL ENGINEERING, vol. 7, pp. 1-9, ISSN: 1687-8132. Online access.
  • Campatelli, Gianni; Sallese, Lorenzo; Scippa, Antonio (2015). Design of An Active Workpiece Holder. In: 9th International Conference on Axiomatic Design (ICAD 2015), Elsevier, vol. 34, pp. 217-222. Online access.
  • Barbieri, Riccardo; Campatelli, Gianni (2015). Investigation on Optimal Mobility System using Axiomatic Design and Scoring Matrix: the “Drive Ability” Experiment. In: 9th International Conference on Axiomatic Design (ICAD 2015), Elsevier, vol. 34, pp. 180-185. Online access.
  • Gianni Campatelli, Antonio Scippa, Francesco Rafanelli (2015). DEVELOPMENT OF CHATTER INDICES BASED ON MA-CHINING SOUND ANALYSIS. In: 22th International Congress on Sound and Vibration, Firenze, 12-16 June 2015, ICSV, vol. 1, pp. 1-8. Online access.
  • Alessandro Velenosi; Gianni Campatelli; Antonio Scippa (2015). Axis geometrical errors analysis through a performance test to evaluate kinematic error in a five axis tilting-rotary table machine tool. PRECISION ENGINEERING, vol. 39, pp. 224-233, ISSN:0141-6359. Online access.
  • Antonio Scippa; Lorenzo Sallese; Niccolò Grossi; Gianni Campatelli (2015). Improved dynamic compensation for accurate cutting force measurements in milling applications. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, vol. 54-55, pp. 314-324, ISSN: 0888-3270 Online access.
  • Gianni Campatelli; Leonardo Sapuppo; Antonio Scippa (2015). Analytical - FE simulation of a multi-jet electrospinning process to predict material flow. SIMULATION MODELING PRACTICE AND THEORY, vol. 52, pp. 135-148, ISSN: 1569-190X. Online access. 
  • Axel Barkow; Gianni Campatelli; Riccardo Barbieri; Stefano Persi (2015). Solutions and Business Models for Wireless Charging of Electric Vehicles. In: David Beeton, Gereon Meyer. Electric Vehicle Business Models, pp. 109-128, London: Springer, ISBN: 978-3-319-12244-1.
  • Gianni Campatelli; Antonio Scippa; Lorenzo Lorenzini; Ryuta Sato (2015). Optimal workpiece orientation to reduce the energy consumption of a milling process. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING GREEN TECHNOLOGY, vol. 2, pp. 5-13, ISSN: 2288-6206 Online access.
  • Sandra Zecchi-Orlandini, Tamara Zappaterra, Gianni Campatelli, Lisa Ariani, Andrea Meneghin, Costanza Rossi, Claudia Zudetich (2015). Students with Learning Disabilities at University. Design of a Protocol for Usability of Teaching and Individual Study/ Studenti con disturbi specifici di apprendimento all'Università. Costruzione di un protocollo per la fruibilità della didattica e per lo studio individuale. In Italian Journal of Special Education for Inclusion, Rivista semestrale della Società Italiana di Pedagogia Speciale, Anno III, n.1, pp.123-134, ISSN 2282-5061 (press), ISSN 2282-4051 (on line). Online access.
  • Niccolò Grossi (2015). PhD in Industrial Engineering, University of Firenze (Italy) “Modelling and simplification methods for machine tool dynamics prediction in high speed milling” Supervisor: Dr Antonio Scippa, External examiner: Prof Dr Yusuf Altintas

 

2014:

  • Uki SATO; Ryuta SATO; Keiichi SHIRASE; Nobu Nakayama; Mitsunari Oda; Shingo Kajikawa; Gianni Campatelli; Antonio Scippa (2014). Geometrical Simulation of Finished Surface Generated by Ball End-milling with Dynamic Motion Error of Feed Drive Systems. In: International Conference on Precision Engineering, Kanazawa (Japan), 23-25/07/2014, pp. 739-740.
  • Campatelli, Gianni; Meneghin, Andrea; Benesperi, Filippo; Barbieri, Riccardo (2014). Implementing electric mobility new business model in future scenario: The electric park and ride system. In: 2014 IEEE International Electric Vehicle Conference, IEVC 2014, Palazzo dei Congressi, ita, 2014, Institute of Electrical and Electronics Engineers Inc., pp. 1-8, ISBN: 9781479960750. Online access.
  • Campatelli, Gianni; Benesperi, Filippo; Barbieri, Riccardo; Meneghin, Andrea (2014). New business models for electric mobility. In: 2014 IEEE International Electric Vehicle Conference, IEVC 2014, Palazzo dei Congressi, ita, 2014, Institute of Electrical and Electronics Engineers Inc., pp. 1-8, ISBN:9781479960750. Online access.
  • Campatelli, Gianni; Benesperi, Filippo; Barbieri, Riccardo; Meneghin, Andrea (2014). Introducing wireless charging facilities for electric vehicles: The case study of Firenze. In: 2014 IEEE International Electric Vehicle Conference, IEVC 2014, Palazzo dei Congressi, ita, 2014, Institute of Electrical and Electronics Engineers Inc., pp. 1-7, ISBN:9781479960750. Online access.
  • Antonio Scippa; Niccolò Grossi; Gianni Campatelli (2014). Simulation of HSM: accurate measurement of speed dependent cutting force coefficients and dynamics for chatter detection. In: iAM CNC/MTTRF annual meeting 2014, San Francisco CA (USA), June 26th-27th, Yamazaki K, pp. 189-194.
  • Ryuta Sato; Yuki Sato; Keiichi Shirase; Gianni Campatelli; Antonio Scippa (2014). Finished Surface Simulation Method to Predicting the Effects of Machine Tool Motion Errors. INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY, vol. 8, pp. 801-810, ISSN:1881-7629.
  • Gianni Campatelli; Lorenzo Lorenzini; Antonio Scippa (2014). Optimization of process parameters using a Response Surface Method for minimizing power consumption in the milling of carbon steel. JOURNAL OF CLEANER PRODUCTION, vol. 66, pp. 309-316, ISSN:0959-6526. Online access.
  • Ryuta Sato; Kentaro Nishio; Keiichi Shirase; Gianni Campatelli; Antonio Scippa (2014). Influence of Motion Error of Translational and Rotary Axes onto Machined Surface Generated by Simultaneous Five-axis Motion. In: 6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), Univ Calif, Berkeley & Davis Campuses, Berkeley, CA, JUN 23-25, 2014, Dornfeld, D; Helu, M, vol. 14, pp. 269-274. Online access.
  • Gianni Campatelli;Antonio Scippa;Lorenzo Lorenzini (2014). Workpiece Orientation and Tooling Selection to Reduce the Environmental Impact of Milling Operations. In: 6th CIRP International Conference on High Performance Cutting (HPC), Univ Calif, Berkeley & Davis Campuses, Berkeley, CA, JUN 23-25, 2014, Dornfeld, D; Helu, M, vol. 14, pp. 575-580. Online access.
  • N. Grossi; L. Sallese; A. Scippa;G. Campatelli (2014). Chatter Stability Prediction in Milling Using Speed-varying Cutting Force Coefficients. In: 6th CIRP International Conference on High Performance Cutting (HPC), Univ Calif, Berkeley & Davis Campuses, Berkeley, CA, JUN 23-25, 2014, Dornfeld, D; Helu, M, vol. 14, pp. 170-175. Online access.
  • Scippa A.; Grossi N.; Campatelli G. (2014). FEM based Cutting Velocity Selection for Thin Walled Part Machining. In: 6th CIRP International Conference on High Performance Cutting (HPC), Univ Calif, Berkeley & Davis Campuses, Berkeley, CA, JUN 23-25, 2014, Dornfeld, D; Helu, M, vol. 14, pp. 287-292. Online access.
  • Yuta Inoue; Ryuta Sato; Akio Hayashi; Keiichi Shirase; Gianni Campatelli; Antonio Scippa (2014). Development of an Energy Consumption Estimation Model for Feed Drive Systems in NC Machine Tools. In: International Symposium on Flexible Automation, Awaji-Island, Hyogo, Japan, 14 - 16 July, 2014.
  • A. Scippa (2014). Simulazione e Analisi Software per Macchine Utensili. A&C. ANALISI E CALCOLO, pp. 2-6, ISSN:1128-3874.
  • M. Law; N. Grossi; A. Scippa; A.S. Phani; Y. Altintas (2014). Modeling the orientation-dependent dynamics of machine tools with gimbal heads. In: 3rd International Chemnitz Manufacturing Colloquium, ICMC 2014, Chemnitz, Germany, 8-9 April 2014, Fraunhofer IWU, pp. 779-795, ISBN:9783957350046. Online access
  • A. Velenosi (2014). PhD in Industrial Engineering, University of Firenze (Italy) “Analisi e modellazione dell'errore quasi-statico di natura cinematica e flessibile per una macchina utensile a cinque assi con tavola roto-basculante” Tutor: Dr.Gianni Campatelli.

 

 

2013:

  • A. Scippa; N. Grossi; A. Velenosi; G. Campatelli (2013). Milled surface generation model for time domain simulation. In: MTTRF 2013 Annual Meeting, San Francisco, CA, USA, June 30th - July 2nd, Machine Tool Technologies Research Foundation, pp. 189-194.
  • G. Campatelli (2013). Reducing the environmental footprint of machining operations. In: HSS Forum Conference 2013, HSS Forum association, pp. 0-0.
  • A. Velenosi; A. Scippa; G. Campatelli (2013). Kinematic quasi-static errors evaluation through performance test for tilting-rotary table five axis machine tool. In: XI° A.I.Te.M. Conference, San Benedetto del Tronto, Italy, September 9-11, F.Gabrielli, pp. 111-112.
  • Antonio Scippa; Niccolò Grossi; Gianni Campatelli (2013). Milled Surface Generation Model for Chip Thickness Detection in Peripheral Milling. In: 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Turin, Italy, 13-14/06/2013, Elsevier, vol. 8, pp. 449-454. Online access.
  • N. Grossi; A. Scippa; G. Campatelli (2013). A general Algorithm for Chip Section Modeling in Milling Process. In: XI° A.I.Te.M. Conference, San Benedetto del Tronto, Italy, September 9-11, Gabrielli, pp. 111-112.
  • A. Scippa; N. Grossi; G. Campatelli (2013). Tool point dynamics prediction using a hybrid FE experimental modeling of milling machine. In: XI° A.I.Te.M. Conference, San Benedetto del Tronto, Italy, September 09-11, F.Gabrielli, pp. 37-39.
  • Riccardo Barbieri (2013). PhD in Industrial Engineering, University of Firenze (Italy) “Sviluppo di un Modello per la Progettazione di Prodotti e Processi” Tutor: Dr.Gianni Campatelli.

 

 

2012:

  • G. Campatelli; A. Scippa (2012). A heuristic approach to meet geometric tolerance in high pressure die casting. SIMULATION MODELING PRACTICE AND THEORY, vol. 22, pp. 109-122, ISSN:1569-190X. Online access.
  • G. Campatelli; A. Scippa (2012). Prediction of milling cutting force coefficients for Aluminum 6082-T4. In: Procedia CIRP, 5th CIRP Conference on High Performance Cutting, Zurich, 4-6 June 2012, Elsevier, vol. 1, pp. 563-568. Online access.
  • G. Campatelli; A. Scippa; A. Velenosi (2012). Tool path quasi-static error simulation for a three axes machine tool using multi-body modelling. JOURNAL OF MODELLING AND SIMULATION OF SYSTEMS, vol. 3, pp. 51-56, ISSN:1737-9377. 
  • R. Barbieri; G. Campatelli (2012). Why en route recharge can be a succesful technology for future electric mobility?. INGEGNERIA DELL'AUTOVEICOLO, pp. 24-32, ISSN:2280-8752.
  • G.Campatelli; A.Scippa; N. Grossi; A.Velenosi (2012). Hybrid FE-experimental modeling of machine tool dynamics. In: Proceedings of MTTRF 2012 Annual Meeting, Iga - Japan, 24-26 June 2012, pp. 1-8.
  • R. Barbieri; G. Campatelli (2012). E-mobility pathway: a method for the feasibility study. In: Mobility in a Globalized world 2012, Bamberg, Germany, 24th-25th september 2012, pp. 1-16.
  • M. Pierini; N. Baldanzini; A. Scippa; F. Lorenzi; R. Parissenti (2012). Improved helmet. Numero: EP2312961B1 Dainese S.p.A. - 36060 Molvena (IT); Universita’ Degli Studi di Firenze 50121 Firenze (IT).
  • E. Giannetti, A. Meneghin, “Valutazione del rischio da stress lavoro-correlato: L'esperienza della Commissione interdisciplinare dell'Ateneo di Firenze”, Associazione Italiana di Psicologia - Congresso nazionale delle Sezioni - 1992-2012 Psicologia, Scienza, Società. Chieti, 20-23 settembre 2012, Espress Edizioni - Torino, p. 461-462, ISBN/ISSN: 9788897412663.

 

 

2011:

  • G.Campatelli; A.Scippa; A.Velenosi (2011). Dynamic modeling of cutting processes. In: MTTRF 2011 Annual Meeting, Chicago (US), 6-7 July 2011, vol. 1, pp. 65-80.
  • G.Campatelli (2011). Tolerance Synthesis Using Axiomatic Design. In: 6th International Conference on Axiomatic Design, Daejeon, 30-31 March 2011, ICAD, vol. 1, pp. 1-6.
  • G. Campatelli; P.Citti; A. Meneghin; R. Barbieri (2011). Process Optimization Using a New Concept for Process Coupling. In: 6th International Conference on Axiomatic Design, Daejeon, 30-31 March 2011, ICAD, vol. 1, pp. 1-6.
  • G.Campatelli; A.Scippa (2011). Process parameters optimization for an electrospinning process using a DoE approach. In: 10° AITEM conference, Napoli, 12-14 September 2011, AITEM, vol. 1, pp. 1-13, ISBN:9788890606106.
  • G. Campatelli (2011). DFSS made easy: the mixed approach Axiomatic Design and QFD, theory and case study. SEI SIGMA & QUALITà€, vol. volume 2, numero 4, pp. 373-384, ISSN:2039-2583.
  • G. Campatelli; P. Citti; A. Meneghin (2011). Development of a simplified approach based on the EFQM model and Six Sigma for the implementation of TQM principles in a university administration. TOTAL QUALITY MANAGEMENT & BUSINESS EXCELLENCE, vol. Volume 22, number 7, pp. 691-704, ISSN:1478-3363.
  • A. Scippa (2011). Geometria ottimizzata grazie alla simulazione. STAMPI, vol. Luglio, pp. 39-43, ISSN:1121-063X.
  • A. Pratellesi; S. Turrin; T. Haag; A. Scippa; N. Baldanzini (2011). On the effect of testing uncertainties in the homologation tests of motorcycle helmets according to ECE 22.05. INTERNATIONAL JOURNAL OF CRASHWORTHINESS, vol. 16 (5), pp. 523-536, ISSN:1358-8265. Online access.
  • P. Citti, A. Meneghin, A. Giorgetti, I. Pianigiani, “Sviluppo di un sistema innovativo per sollevamento e ritenzione della ruota di scorta di veicoli terrestri”, Convegno Nazionale AIAS 2011, 7-10 September 2011, Palermo, Italy.
  • P. Citti, M. Delogu, A. Meneghin, F. Pagliai, “An engineering and psycho-social integrated approach for work related stress (WRS) assessment and management”, Proceedings of ESREL 2011, 18-22 September 2011, Troyes, France.
  • E. Giannetti, F. Pagliai, A. Meneghin, D. Giannelli, “Valutazione del rischio da stress correlato al lavoro – Progetto pilota”, Firenze University Press, 2011.

 

 

2010:

  • S. Boncinelli; P. Citti; E. Del Re; G. Campatelli; L. Pierucci; L. Bocchi (2010). Real time detection and tracking of Gauzes by RFID UWB technique. In: IEEE International Conference on RFID, Orlando (USA), 14-16 April 2010, IEEE, vol. 1, pp. 97-101, ISBN:9781424457427. Online access.
  • G.Campatelli (2010). Valutare e migliorare i processi: applicazione del Sei Sigma in ambito sanitario. SEI SIGMA & QUALITA', vol. Volume 1, numero 3, pp. 283-300, ISSN:2039-2583.
  • G. Campatelli (2010). Geometrical Tolerance Evaluation Using Combined Vision-Contact Techniques and Other Data Fusion Approaches. In: N. Senin, B.M. Colosimo. Geometric Tolerances: Impact on Product Design, Quality Inspection and Statistical Process Monitoring, pp. 199-224, New York: Springer, ISBN:9781849963107.
  • G. Campatelli; A. Scippa; A. Velenosi; G. Goli (2010). Analysis of wood cutting mechanics with different grain orientation. In: IPROMS 2010 conference, 15-26 November 2010, pp. 1-6.
  • G. campatelli; A. scippa (2010). Die Casting Process Optimization using a Thermal-Structural Coupled Finite Element Analysis. In: 8th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, Capri, 22 - 25 July 2010, pp. 1-4.
  • G. Campatelli; A. Scippa; F. Bandini (2010). Virtual cutting to improve the product tolerances of 5 axes machine tools. In: Proceedings of MTTRF 2010 Annual Meeting, San Francisco, July 7-8 2010, pp. 1-6.
  • G.Campatelli; N.Senin (2010). Assessment of Geometric Error on Micromanufactured Surface Features with Profilometers and Microscopes. In: N. Senin, B.M. Colosimo. Geometric Tolerances: Impact on Product Design, Quality Inspection and Statistical Process Monitoring, pp. 161-198, New York: Springer, ISBN:9781849963107.

 

 

2009:

  • G.Campatelli; P.Citti (2009). Business process analysis and reengineering of administrative processes using axiomatic design: theory and case study from the university of Firenze. In: 5th International Conference on Axiomatic Design, Lisbona, Marzo 2009, vol. 1, pp. 1-8.
  • G.Campatelli (2009). Analysis of the environmental impact for a turning operation of AISI 1040 steel. In: IPROMS 2009 conference, 7-14 July 2009, IPROMS, vol. 1, pp. 354-360, ISBN:9781849950060.
  • A. Scippa (2009). Numerical modeling of Electrospinning Process. In: AiTeM 2009, Torino, 7-9 settembre, pp. 1-10, ISBN:9788895057071.

 

 

2008:

  • G. Campatelli; A. Del Taglia (2008). Selective Assembly Strategy Definition Using a Neural Network Approach. In: 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, Napoli, 23 - 25 July 2008, pp. 1-8.
  • G. Campatelli; A. Scippa (2008). Manufacturing Cost Estimation Using Neural Network. In: 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, Napoli, 23 - 25 July 2008, pp. 1-8.
  • M. Pierini; N. Baldanzini; A. Scippa; F. Lorenzi; R. Parissenti (2008). Casco perfezionato. Università degli Studi di Firenze; Dainese S.p.A.
  • A.Scippa; M.Pierini; A.Delhaye (2008). Prototype validated helmet model. pp. 1-29. 

 

 

2007:

  • R. Capitani, G. Frosali, A. Meneghin, A. Baldussu, “Modello matematico per la simulazione del comportamento dinamico di un veicolo a due ruote di tipo scooter in marcia rettilinea”, XXXVI Convegno Nazionale AIAS, 4-8 settembre 2007, Ischia, Italy.
  • G. CAMPATELLI; A. DEL TAGLIA; A. SCIPPA (2007). Design of an Innovative End Mill Holder. In: 8° AITEM conference, Montecatini Terme, 10-12 September 2007, pp. 1-8, ISBN:9788879572644.
  • G. CAMPATELLI; A. DEL TAGLIA (2007). Micro Reverse Engineering and Virtual Testing Using SEM Photogrammetry. In: 8° AITEM conference, Montecatini terme, 10-12 September 2007, pp. 1-10, ISBN:9788879572644.
  • G. CAMPATELLI; A. DEL TAGLIA (2007). Automatic evaluation of tool geometry for resharpening using an Artificial Vision system. In: IV international conference on Advances in Production Engineering, APE07, Warsaw (PL), 14-16 June 2007, pp. 60-68.
  • G. CAMPATELLI; A. DEL TAGLIA; A. SCIPPA (2007). Optimization of Die Geometry Using Thermal FEM Analysis in Die Casting Process. In: 8° AITEM conference, Montecatini terme, 10-12 September 2007, pp. 1-9, ISBN:9788879572644.
  • R. Capitani; N. Baldanzini; M. Pierini; A. Scippa (2007). Considerazioni sugli incidenti stradali che coinvolgono veicoli motorizzati a due ruote. BOLLETTINO INGEGNERI, vol. No.3, pp. 16-24, ISSN:2035-2417.

 

 

2006:

  • C. CIAPPEI; P. CITTI; N. BACCI; G. CAMPATELLI (2006). La metodologia Sei Sigma nei servizi. Un'applicazione ai modelli di gestione finanziaria. FIRENZE: FUP, ISBN:9788884534859.
  • C. Ciappei; P.Citti; N.Bacci; G.Campatelli (2006). La metodologia Sei Sigma nei servizi. Firenze: Firenze University Press, ISBN:9788884534859.
  • S. BONCINELLI; G. CAMPATELLI; P. CITTI; E. DEL RE; L. PIERUCCI (2006). Metodo ed apparato per la rilevazione real time di garze e supporti chirurgici. Numero: FI2006 A000240 Università  degli Studi di Firenze.
  • G. CAMPATELLI; A. DEL TAGLIA (2006). Axiomatic Design & QFD: a case study of a reverse engineering system for cutting tools. In: 4th International Conference on Axiomatic Design, Firenze, 13-15 June 2006, pp. 1-8.
  • G. CAMPATELLI; A. DEL TAGLIA (2006). Development of an on line test for the accuracy evaluation of a cradle milling machine. In: XVII Workshop on Supervision and Diagnostics of Machining Systems, Karpacz (PL), 13-15 March 2006, pp. 140-148.
  • N. BALDANZINI; P. CITTI; M. PIERINI; A. SCIPPA (2006). Considerations on the Modelling of a Benchmark Structure and Applicability of Statistical Energy Analysis. In: ISMA2006 Conference, Leuven, Belgio, 18-20 Settembre 2006, KATHOLIEKE UNIV LEUVEN, DEPT WERKTUIGKUNDE, CELESTIJNENLAAN 300B, HEVERLEE, B-3001, BELGIUM, pp. 739-753, ISBN:9073802830.
  • R. Capitani, G. Masi, A. Meneghin, D.G. Rosti, “Handling Analysis of a Two-wheeled Vehicle using MSC.ADAMS/Motorcycle”, XIX IAVSD Symposium, , 29 august – 2 september 2005, Milano, Italy, poi pubblicato su Vehicle System Dynamic, vol. 44, January 2006, pag687-707, ISSN 0042-3114.

 

 

2005:

  • G. CAMPATELLI; A. DEL TAGLIA (2005). Design and performance assessment of HSM tool holder. In: 7th International Conference on Advanced Manufacturing System and Technology (AMS, Udine, 9-10 June 2005, vol. 486, pp. 533-541, ISBN:9783211265376.
  • P. CITTI; CAMPATELLI G (2005). VANTAGGI STRATEGICI DELLA GESTIONE DEI PROCESSI CON L'APPROCCIO SEI SIGMA. INGEGNERIA DELL'AUTOVEICOLO, vol. 58 n.7/8, pp. 38-44, ISSN:2280-8752. 
  • G. CAMPATELLI; A. DEL TAGLIA (2005). Application of Artificial Vision technique to evaluate tool geometry for regrinding machine set up. In: 7th AITEM Conference, Lecce, 7-9 Sept. 2005, pp. 1-8.
  • G. CAMPATELLI; A. DEL TAGLIA (2005). The Simultaneous Tolerance Synthesis to optimize production and quality costs. In: 7th AITEM Conference, Oxford (UK), 7-9 Settembre 2005, pp. 1-2.
  • G. CAMPATELLI; A. DEL TAGLIA (2005). Optimization of an induction quenching process using Response Surface approach. In: 7th International Conference on Advanced Manufacturing System and Technology (AMS, Udine, 9-10 June 2005, vol. 486, pp. 493-502, ISBN:9783211265376.
  • A. Scippa; N. Baldanzini; M. Pierini (2005). Standards and research activities conducted with regard to the compatibility of motorcycles with other vehicles. pp. 1-13.
  • A. Scippa; G. Nerli (2005). Il controllo della velocità nella trasmissione con cinghie piane tangenziali. In: AIAS 2005 XXXIV CONVEGNO NAZIONALE, Milano, 14/09-19/09, pp. 1-9. 
  • A. Scippa; N. Baldanzini; M. Pierini (2005). Standards and research activities conducted on motorcycles, infrastructure, protective clothing & helmets. pp. 1-69. 
  • N. Campo, E. Giacomelli, A. Meneghin, S. Pratesi, G. Zonfrillo, “Evaluation of loads on a hypercompressor plunger in service conditions”, 2005 ASME pressure vessels and piping conference, 17–21 July 2005 (APVP2005-71294), Denver, USA.
  • R. Capitani, A. Meneghin, D.G. Rosti, “Experimental analysis of the handling behaviour of a two-wheeled vehicle”, SAE Technical Paper, 2004-SETC-80 (Incluso in SAE Transact 2005).

 

 

2004:

  • G. CAMPATELLI; A. DEL TAGLIA (2004). Simultaneous optimization of quality and manufacturing cost: basic concepts. In: Quality Reliability Mantenaibility 2004 (QRM04) conference, Oxford (UK), April 2004, pp. 60-65.
  • G. ARCIDIACONO; G. CAMPATELLI (2004). Axiomatic Design for reliability: FMETA approach. QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, vol. Volume 20, Issue 2, pp. 143-154, ISSN:0748-8017.
  • G. Campatelli (2004). SVILUPPO DI UN APPROCCIO STRUTTURATO ALLA PROGETTAZIONE BASATO SULLA TEORIA AXIOMATIC DESIGN. (Tutor: P. Citti).
  • G. CAMPATELLI; A. DEL TAGLIA (2004). Evaluating the cost of poor quality and tolerance-cost curves for Simultaneous Tolerance Synthesis. In: Quality Reliability Mantenaibility 2004 (QRM04) conference, Oxford (UK), April 2004, pp. 15-18, ISBN:9781860584404.
  • N. BALDANZINI; M. PIERINI; A. SCIPPA (2004). On the integration of finite elements and statistical energy analysis to improve the calculation of coupling loss factors. In: ISMA2004, Leuven, Belgium, 20-22 Settembre 2004, KATHOLIEKE UNIV LEUVEN, DEPT WERKTUIGKUNDE, CELESTIJNENLAAN 300B, HEVERLEE, B-3001, BELGIUM, pp. 1417-1431, ISBN:9789073802827.
  • N. Baldanzini; A. Scippa (2004). Shape and size optimization of an engine suspension system. In: Noise and Vibration Engineering ISMA 2004 Conference, Leuven, Belgium, 20/09-22/09, KATHOLIEKE UNIV LEUVEN, DEPT WERKTUIGKUNDE, CELESTIJNENLAAN 300B, HEVERLEE, B-3001, BELGIUM, pp. 3539-3553, ISBN:9073802822.
  • N. Baldanzini; A. Scippa (2004). Ottimizzazione strutturale di un sistema di sospensione motore. In: Convegno Nazionale XIV ADM - XXXIII AIAS, Bari, 31/08-02/09, pp. 1-16, ISBN:9788890063725. 
  • A. Scippa; G. Nerli (2004). Controllo della velocità nella trasmissione con cinghie piane. In: Convegno Nazionale XIV ADM - XXXIII AIAS, Bari, 31/08-02/09, pp. 1-8. 
  • A. Scippa; G. Nerli (2004). Controllo della velocità nelle trasmissioni con cinghie piane. ORGANI DI TRASMISSIONE, vol. N. 11, pp. 96-100, ISSN:0030-4905.

 

 

2003:

  • ARCIDIACONO G.; CAMPATELLI G.; P. CITTI; MARCHESELLI M. (2003). Progetto delle Tubazioni di Interconnessione di Impinati di Turbocompressione con Approcio DFSS. In: XXXII Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni, Salerno, 3-6 settembre 2003.
  • N. BALDANZINI; G. NIEROP; M. PIERINI; A. SCIPPA (2003). Hybrid numerical-experimental Characterization of non-conservative joints for SEA applications. In: 10th International Congress on Sound and Vibration, Stockholm, Svezia, 7-10 Luglio 2003, ICSV, pp. 1139-1146.
  • R. Capitani, M. Bandini, A. Meneghin, D.G. Rosti, “Esempio di collaborazione Industria - Università: modelli di simulazione di un veicolo a due ruote” Autotecnica, Luglio 2003
  • R. Capitani, A. Meneghin, D.G. Rosti, “Virtual prototyping of a two-wheeled vehicle”, SAE Technical Paper, 2003-01-0672.
  • P.CITTI; G.ARCIDIACONO; G.CAMPATELLI (2003). Fondamenti di Affidabilità . MILANO: Mc Graw Hill, ISBN:9788838660986.
  • P. CITTI; G. ARCIDIACONO; G. CAMPATELLI (2003). Systematic approach to Product Design using Axiomatic Design: application to a diesel locomotive. In: International Conference Engineering Design 2003 (ICED03) conference, Stockholm (SK), August 19-21, 2003, pp. 1-10.

 

 

2002:

  • G. ARCIDIACONO; G. CAMPATELLI (2002). From the Customer Domain to the Functional and Physical Domain for improving overall product Quality. In: Quality, Reliability and Mantenability Conference, Oxford (UK), 21-22 March 2002, vol. 1, pp. 200-204, ISBN:9781860583698.
  • G. ARCIDIACONO; G. CAMPATELLI; P.CITTI (2002). Misurare per migliorare: approccio moderno alla Qualità. U & C. UNIFICAZIONE E CERTIFICAZIONE, vol. 7, pp. 8-10, ISSN:0394-9605
  • G. ARCIDIACONO; G. CAMPATELLI; P.CITTI (2002). Optimization of the experimental test plan for Taguchi methods. In: 19th Annual ASI’s Taguchi Methods Symposium on Robust Engineering, San Diego (US), October 14 - 16 2002, pp. 1-12.
  • G. ARCIDIACONO; T. BORALEVI; G. CAMPATELLI (2002). Progettazione e sviluppo prodotto con approccio AD: applicazione ad una centralina elettronica di iniezione per motori diesel. In: XXXI Convegno Nazionale AIAS, Parma (IT), 18-21 Settembre 2002, pp. 1-8.
  • G. ARCIDIACONO; G. CAMPATELLI; P.CITTI; M.VIANELLO (2002). Ottimizzazione delle prove sperimentali di affidabilità durante la fase di progettazione e sviluppo prodotto. In: XXXI Convegno Nazionale AIAS, Parma (IT), 18-21 Settembre 2002, pp. 1-12.
  • G. ARCIDIACONO; G. CAMPATELLI; P. CITTI (2002). Axiomatic Design For Six Sigma. In: Second International Conference on Axiomatic Design (ICAD 2002), Boston (US), June 2002, pp. 1-10.
  • G. ARCIDIACONO; G. CAMPATELLI; P. CITTI (2002). Estimating correlation reliability when designing the corrosion allowance for gas and oil power plant using the DFSS method. In: Quality Reliability Mantenaibility 2002 (QRM02) conference, Oxford (UK), March 2002, pp. 1-5.
  • N. Baldanzini; M. Pierini; A. Scippa (2002). SEA modeling of an high speed train window. In: Noise and Vibration Engineering ISMA2002, Leuven, Belgio, 16-18 settembre 2002, KATHOLIEKE UNIV LEUVEN, DEPT WERKTUIGKUNDE, CELESTIJNENLAAN 300B, HEVERLEE, B-3001, BELGIUM, pp. 765-773, ISBN:9789073802797
  • N. Baldanzini; A. Scippa (2002). Sviluppo di criteri di modellazione SEA per una struttura autoveicolistica semplificata. In: XXXI Convegno Nazionale dell'Associazione Italiana per l’Analisi delle Sollecitazioni, Parma, 18-21 settembre 2002, pp. 1-12.
  • N. Baldanzini; A. Scippa (2002). Modellazione SEA di una giunzione con elementi elastici. In: XXXI Convegno Nazionale dell'Associazione Italiana per l’Analisi delle Sollecitazioni, Parma, 18-21 settembre 2002., pp. 1-12.
  • R. Capitani, A. Meneghin, D.G. Rosti, “Sviluppo e validazione di un simulatore di guida di un veicolo a due ruote”, XXXI Convegno Nazionale AIAS, , 18-21 september 2002, Parma, Italy.

 

 

2001:
  • G. ARCIDIACONO; G. CAMPATELLI; H. LIPSON (2001). A measure for design coupling. In: International Conference on Engineering Design, Glasgow, 21-23 August 2001, pp. 1-11.
 
ultimo aggiornamento: 09-Lug-2017
Unifi Home Dipartimento Home MTRL

Inizio pagina